Evolveo StrongVision 2GB, Manual

Page: 71 / 158

POWER
WHEN USING
9­12V POWER
SOURCE
7. Remove the rubber cap
of the port on the bottom
side of the camera.
Connect a universal 9-
12V cable to the port on
the bottom side of the
camera.
8. Route the cable to the
side of the camera, there
is a hook under the door
hinge to secure the
cable. This secures the
power cable and
prevents pressure at the
connection point.
9. If you are not using the
universal 9-12V port on
the bottom side of the
camera, cover it again
with the rubber cap.
71