Evolveo StrongVision 2GB, Manual

Page: 78 / 158

MMS SETTING
Configuration
To set the camera trap, you need to use the EVOLVEO Config tool which
is available for download at the link below. This tool will create a
PARAMETER.DAT file that needs to be saved on the SD card of the
device. Always insert the SD card with the file into a switched off device,
otherwise the settings will not be loaded.
Configuration software is only for MS Windows
EVOLVEO Config is available for download here:
https://webftp.evolveo.com/ftp/digital_camera/strongvision/strongvision-
2gb/SW/
Unzip the EVOLVEO_CONFIG.zip file.
Do you need help with the setting?
Scan this QR code using your mobile phone
and you will be redirected to our video guide.
MMS setting
Automatic MMS mode:
In the MMS tab, select MMS ON and then the “Auto” option and the
camera trap will offer you default settings for your operator in the next
settings. MMS are charged according to the rates of your operator and it
is usually more expensive service than sending an email.
•
Select your country
• Select your operator
•
Fill in the receiver's phone number in the blank box on the right.
•
Fill in the email address for receiving photos. In this setting, the
sent EMAIL is charged the same as MMS. If you want to send
78