45
cycle. Run a manual defrost cycle if
desired.
Door doesn't close/closes incorrectly
Check to make sure something isn't
blocking it from closing completely.
Door alarm keeps sounding
Check to make sure the door is
properly aligned in the frame by
looking for uneven surfaces. For
example, is the gap from the hinge to
edge equal in width all the way across
the surface?
I can't hear any noise from the unit
Is the power on? Is the LED on front a
solid green? If so, the unit is powered
and operating normally. Once the
refrigerator reaches its set point
temperature then it will be very quiet
during normal operating conditions.
I hear more fan noise than normal
Has the temperature risen recently? Is
the front free & clear for proper
ventilation? If you've recently held the
door open for an extended period of
time or you put warmer product in the
refrigerator, then the unit is likely
recovering to its set point temperature.
Only be alarmed if you hear abnormal
fan sounds.
How long do I have to wait before I can
load the refrigerator?
Once the unit displays 4 °C, you are
safe to start loading. If loading with
room temperature product, we
recommend loading the refrigerator in
small increments to avoid raising the
temperature above the controlled
temperature zone.
What is the difference between an air
sensor and a glycol sensor?
The air sensor is located along the back
panel and represents the open air
temperature. A glycol sensor is the vial
of liquid with a thermocouple inserted
in the liquid. The glycol sensor is most
representative of the typical product
stored in the refrigerator. It will take
the glycol sensor longer to reach the
desired set point temperature and it
will remain stable longer than the air
sensor. The display is defaulted to read
the glycol sensor.
System doesn't recognize USB drive
We recommend inserting the USB while
the display is reading temperature
(default screen). Once plugged in you
should see a USB icon appear on the
icon bar. If it doesn't register after a