Evolution RAGE3-DB, Original Instructions Manual

Page: 13 / 116

assemble and move this machine. Remove
the machine, together with the accessories
supplied from the packaging.
Check carefully to ensure that the machine
is in good condition and account for all the
accessories listed in this manual. Also make
sure that all the accessories are complete. If any
parts are found to be missing, the machine and
its accessories should be returned together in
their original packaging to the retailer.
Do not throw the packaging away; keep it safe
throughout the guarantee period. Dispose
of the packaging in an environmentally
responsible manner. Recycle if possible. Do
not let children play with empty plastic bags
due to the risk of suffocation.
ITEMS SUPPLIED
Description Qty
Instruction Manual
(Operations)
1
Hold Down Clamp 1
Hex Key 5mm
(Blade Change)
1
Multipurpose Blade 1
ADDITIONAL ACCESSORIES
In addition to the standard items supplied with
this machine, other accessories are available
to enhance its performance. These include the
following items:
Description Part N°
Specialist cutting blades
(use only Evolution Blades
with this machine)
Specific to
blade type
Dust Collection Bag EV3DBS202
Workpiece Support Bars EV3DBS76
End Stop
(Repetitive Cutting)
EV3DBSM3
UNLATCHING AND RAISING
THE CUTTING HEAD
WARNING:
To avoid serious injury,
NEVER
perform the unlocking or locking procedure
unless the saw is
OFF
and the blade stopped.
To Release the Cutting Head from the
Locked Down position:
• Gently press down on the Cutting Handle.
• Pull out the head latching pin
(Fig. A)
and
allow the Cutting Head to rise to its upper
position.
(Step 1 & 2)
• The Cutting Head will automatically rise to
the upper position once it is released from
the locked down position.
(Step 3)
• It will automatically lock in the upper position.
If Release is Difficult:
• Gently rock the Cutting Head up and down.
• At the same time twist the Head Latching
Pin clockwise and pull outwards.
Step 3
Step 2
Step 1
Fig. A
13
www.evolutionpowertools.com
EN
ES
FR