®
6
www.evolutionsteel.com
PROHIBITED USE OF THIS POWER TOOL
WARNING:
This product is a Steel
cutting Hand Held circular Saw and must
only be used as such. It must not be modified in
any way, or used to power any other equipment
or drive any other accessories other than those
mentioned in this Instruction Manual.
WARNING:
This machine is not intended
for use by persons (including children) with
reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless
they have been given supervision or instruction
concerning the safe use of the machine by a
person responsible for their safety and who is
competent in its safe use.
children should be supervised to ensure that
they do not have access to, and are not allowed
to play with, this machine.
ELECTRICAL SAFETY
This machine is fitted with the correct moulded
plug and mains lead for the designated market.
If the mains lead or the plug are damaged in
any way, they must be replaced with original
replacement parts by a competent technician.
OUTDOOR USE
WARNING:
For your protection if this
tool is to be used outdoors it should not be
exposed to rain, or used in damp locations. Do
not place the tool on damp surfaces. Use a clean,
dry workbench if available. For added protection
use a residual current device (r.c.D.) that will
interrupt the supply if the leakage current to
earth exceeds 30mA for 30ms. Always check
the operation of the residual current device
(r.c.D.) before using the machine.
If an extension cable is required it must be a
suitable type for use outdoors and so labelled.
The manufacturers instructions should be
followed when using an extension cable.
POWER TOOL GENERAL SAFETY
INSTRUCTIONS
(These General Power Tool Safety Instructions
are as specified in BS En 60745-1:2009 &
En 61029-1:2009)
WARNING: Read all safety warnings
and instructions.
Failure to follow the
warnings and instructions may result in electric
shock, fire and/ or serious injury.
Save all warnings and instructions for
future reference.
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) General Power Tool Safety Warnings
[Work area safety]
a) Keep work area clean and well lit.
cluttered or dark areas invite accidents.
b)
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gasses or dust.
Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating power tool.
Distractions can cause
you to lose control.
2) General Power Tool Safety Warnings
[Electrical Safety]
a) Power tool plugs must match the outlet.
Never modify the plug in any way Do not use
any adapter plugs with earthed (grounded)
power tools.
Unmodified plugs and matching
outlets will reduce the risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes, radiators,
ranges and refrigerators.
There is an
increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts.
Damaged or entangled
cords increase the risk of electric shock.