Evolution EVO180 Instruction Manual Download Page 3

EVO180 / STEEL SAW 1

3

www.evolutionsteel.com

IMPORTANT

Please read these operating and safety 
instructions carefully and completely. 

For your own safety, if you are uncertain 
about any aspect of using this equipment 
please access the relevant Technical Helpline, 
the number of which can be found on the 
Evolution Power Tools website. We operate 
several Helplines throughout our worldwide 
organization, but Technical help is also available 
from your supplier. 

WEB 

www.evolutionpowertools.com/register

Congratulations on your purchase of an 
Evolution Power Tools Machine. Please 
complete your product registration ‘online’ 
as explained in the A5 online guarantee 
registration leaflet included with this 
machine. You can also scan the QR code 
found on the A5 leaflet with a Smart 
Phone. This will enable you to validate your 
machine’s guarantee period via Evolutions 
website by entering your details and thus 
ensure prompt service if ever needed. We 
sincerely thank you for selecting a product 
from Evolution Power Tools. 

EVOLUTION LIMITED GUARANTEE. 

EVOLUTIOn POWEr TOOLS rESErVES 
THE rIGHT TO MAkE IMPrOVEMEnTS AnD 
MODIFIcATIOnS TO THE PrODUcT DESIGn 
WITHOUT PrIOr nOTIcE.

PLEASE rEFEr TO THE GUArAnTEE 
rEGISTrATIOn LEAFLET AnD/Or THE 
PAckAGInG FOr DETAILS OF THE TErMS 
AnD cOnDITIOnS OF THE GUArAnTEE.

Evolution Power Tools will, within the guarantee 
period, and from the original date of purchase, 
repair or replace any goods found to be defective 
in materials or workmanship. This guarantee is 
void if the tool being returned has been used 
beyond the recommendations in the Instruction 
Manual or if the machine has been damaged 
by accident, neglect, or improper service. This 
guarantee does not apply to machines and 
/ or components which have been altered, 
changed, or modified in any way, or subjected 
to use beyond recommended capacities and 
specifications. Electrical components are subject 
to respective manufacturers’ warranties. All 
goods returned defective shall be returned 
prepaid freight to Evolution Power Tools. 
Evolution Power Tools reserves the right to 
optionally repair or replace it with the same or 
equivalent item.  There is no warranty – written 
or verbal – for consumable accessories such as 
(following list not exhaustive) blades, cutters, 
drills, chisels or paddles etc.  In no event shall 
Evolution Power Tools be liable for loss or 
damage resulting directly or indirectly from 
the use of our merchandise or from any other 
cause.  Evolution Power Tools is not liable for any 
costs incurred on such goods or consequential 
damages. no officer, employee or agent of 
Evolution Power Tools is authorized to make oral 
representations of fitness or to waive any of the 
foregoing terms of sale and none shall be binding 
on Evolution Power Tools. 

Questions relating to this limited guarantee 
should be directed to the company’s head 
office, or call the appropriate Helpline number.

Summary of Contents for EVO180





















Reviews: