Evolution EVO180 Instruction Manual Download Page 18 | Manualshive

Page: 18 / 20

Evolution EVO180 Instruction Manual Download Page 18

®

18

www.evolutionsteel.com

EC DECLARATION OF CONFORMITY

In accordance with En ISO 17050-1:2004

The manufacturer of the product covered by this Declaration is.

Evolution Power Tools Ltd.

Venture 0ne, Longacre close, Holbrook Industrial Estate, Sheffield S20 3Fr, Uk

The manufacturer hereby declares that the machine as detailed in this declaration fulfils all the relevant provisions
of the Machinery Directive and other appropriate directives as detailed below.

The manufacture further declares that the machine as detailed in this declaration, where applicable, fulfils the
relevant provisions of the Essential Health and Safety requirements.

The Directives covered by this Declaration are as detailed below

2006/42/Ec Machinery Directive.
2006/95/Ec. Low Voltage Equipment Directive.
2004/108/Ec. Electromagnetic compatibility Directive,
93/68/Ec. The cE Marking Directive.
2011/65/Ec. The restriction of the Use of certain Hazardous Substances in Electrical Equipment (roHS) Directive
2002/96/Ec as amended by 2003/108/Ec The Waste Electrical and Electronic Equipment (WEEE) Directive.

And is in conformity with the applicable requirements of the following documents

En55014-1:2006
En55014-2:1997+A1
En61000-3-2:2006
En61000-3-3:1995+A1+A2
En60745-1:2003+A1
En60745-2-5:2003
En60825-1:1994+A1+A2

Product Details:

Description:

Steel cutting circular Saw

Evolution Model no:

EVO1801/EVO1802/STEELSAW11US

Factory Model no:

J1Y-kZ3-185

Brand name:

Evolution

Voltage:

110V/230-240V/120V

Input:

50/60Hz

The technical documentation required to demonstrate that the product meets the requirements of directive has been
compiled and is available for inspection by the relevant enforcement authorities, and verifies that our technical file
contains the documents listed above and that they are the correct standards for the product as detailed above.

Name and address of technical documentation holder.

All standards listed above have been

met and relevant documentation held by Evolution Power Tools

Signed:

Print: Steven Bulloss: Operations Director

Year that cE was first applied

Signed:

Print: Lettie Lui: Product Manager

Date: 01/12/12

13

EVO180 / STEEL SAW 1

«
...
16
17
18
19
20
»

Summary of Contents for EVO180





















Reviews:

No comments