EVO180 / STEEL SAW 1
5
www.evolutionsteel.com
VIBRATION
WARNING: When using this machine
the operator can be exposed to high
levels of vibration transmitted to the hand
and arm. It is possible that the operator
could develop “Vibration white finger
disease” (Raynaud syndrome). This condition
can reduce the sensitivity of the hand to
temperature as well as producing general
numbness. Prolonged or regular users of this
machine should monitor the condition of
their hands and fingers closely. If any of the
symptoms become evident, seek immediate
medical advice.
• The measurement and assessment of human
exposure to hand-transmitted vibration in the
workplace is given in: BS En ISO 5349-1:2001
and BS En ISO 5349-2:2002
• Many factors can influence the actual vibration
level during operation e.g. the work surfaces
condition and orientation and the type and
condition of the machine being used. Before
each use, such factors should be assessed,
and where possible appropriate working
practices adopted. Managing these factors
can help reduce the effects of vibration:
Handling
• Handle the machine with care, allowing
the machine to do the work.
• Avoid using excessive physical effort on
any of the machines controls.
• Consider your security and stability, and
the orientation of the machine during use.
Work Surface
• Consider the work surface material;
its condition, density, strength,
rigidity and orientation.
WARNING:
The vibration emission during
actual use of the power tool can differ from
the declared total value depending on the ways in
which the tool is used. The need to identify safety
measures and to protect the operator are based on
an estimation of exposure in the actual conditions
of use (taking account of all parts of the operating
cycle, such as the times the tool is switched off,
when it is running idle, in addition to trigger time).
LABELS & SYMBOLS
WARNING:
Do not operate this machine
if warning and/or instruction labels are
missing or damaged. contact Evolution Power
Tools for replacement labels.
Note:
All or some of the following symbols may
appear in the manual or on the product.
Symbol
Description
V
Volts
A
Amperes
Hz
Hertz
Min
-1
Speed
~
Alternating current
n
0
no Load Speed
read Instructions
Double Insulated
Wear Safety Goggles
Wear Ear protection
INTENDED USE OF THIS POWER TOOL
WARNING:
This product is a Steel
cutting Hand Held circular Saw and
has been designed to be used with special
Evolution
blades. Only use blades designed for
use in this machine and/or those recommended
specifically by
Evolution Power Tools Ltd.
When fitted with an appropriate blade this
machine can be used to cut:
Mild Steel
Aluminium
Lumber (blade change recommended)