23
Maintenance of the cleaning roller
When to clean: once a day
How to clean: use cleaning wipes
Your Tattoo printer has a built-in cleaning roller with a sticky surface that captures dust when
cards are passed through. This roller is automatically cleaned when the inside of the printer is clea-
ned. Yet, you should clean it once a day to guarantee that the card surface is perfectly clean. Use
a cloth from the cleaning kit.
Cleaning the cleaning roller:
1.
Open the cover of the printer. Spot the cleaning rol-
ler and remove it from the printer.
2.
Clean the roller with a wipe from your cleaning kit. Remove
dust by gently rubbing the wipe on the roller’s surface.
3.
When dry, put the roller back in the
printer and close the cover.
Wait a couple of minutes after cleaning and before using the printer to let the clea-
ning product evaporate completely
.
If you are using the card feeder, make sure you also clean the cleaning roller, which
is located at the feeder way out.
