![Evolis The Tattoo Rewrite User Manual Download Page 22](http://html1.mh-extra.com/html/evolis/the-tattoo-rewrite/the-tattoo-rewrite_user-manual_2446732022.webp)
22
Cleaning the Print Head
When to clean: once a day
How to clean: use cleaning swabs
The print head is in direct contact with the cards and is cleaned when the inside of the prin-
ter is cleaned. Meanwhile, you should clean it once a day using cotton swabs from the
UltraClean kit. This will help uphold the original printing quality and prevent any damage or
failure caused by a foul or dusty print head.
Important: make sure that the print head and related components are safe from electrostatic dis-
charges.
The print head is a fragile element. To avoid damages:
■
Comply with the cleaning cycles
■
Keep the print head away from sharp or metal objects
■
Do not touch the print head surface with your bare fingers. This might result in poor prin-
ting quality or permanent damages to the print head.
Cleaning the print head:
1.
Open the printer cover and locate the print head.
2.
Take a new swab and press
on the stick to let the liquid
out (clic)
3.
Then, gently rub the swab along and over the
print head during several seconds.
Wait a couple of minutes after cleaning and before using the printer to let the clea-
ning product evaporate completely
.