4.
Connect the cable power plug to a grounded power socket
5.
The printer is powered on. The control panel LED turns on while the print head rises and lowers to indi-
cate that the printer is operating as expected from a mechanical standpoint. A dull LED signals that the
installation has most probably failed or that the printer is not operating as expected. Double-check the
setup.
You must pull the plug off from the socket to totally power off this printer, which means
that the plug must always be reachable.
This product must be plugged to a safe and grounded electrical outlet.
Stand by mode
The Tattoo Rewrite can be set to a stand-by mode on demand by simply pressing
the push button for three seconds. The push button green LED goes off.
Press the push button for a second to switch the prin-
ter on. The push button green LED comes on.
The printer automatically turns to stand-by when idle for ten minutes.
8
