State of the lights
Interpretation
Solution or explanation
30
■
There is no card in the feeder
■
The thickness of the cards has not been cor
rectly adjusted
■
The cards are curved
■
The cards are stuck together
■
The feeder is not present in the printer or is
badly inserted
Check the state of the cards in the feeder or make
sure that the feeder is present in the printer and cor-
rectly inserted Then, press the push button for one
second. The printing restarts
■
The printer is waiting for a card to be inserted
The printer is fitted with the manual feed tray
option: insert a card in the printer. Go to chapter
1 « Starting up ».
■
The printer has to be cleaned
Go to chapter 3 « Cleaning »
.
■
The printer has to be cleaned
Go to chapter 3 « Cleaning »
.
■
The printer cover is open
Close the cover of the printer. The activity in cour-
se restarts.
■
The output hopper is midway between opened
and closed positions.
Close or open the output hopper. The activity in
course restarts.
■
There is a card jammed in the printing sta
tion or in the flip over module
■
A mechanical part in the printer is faulty
Press the push button for one second. If the pro-
blem persists, call your Evolis reseller for assistance.
■
The orientation of the magnetic track in the
feeder is not correct
■
The type of encoding has not been correctly
parameterised (HICO or LOCO). Go to Annexe A
of this manual for more information.
■
The encoded data do not conform to ISO 7811
or to the parameters pre-defined in the properties
of the driver. Go to Annexe A of this manual for
more information.
Press the push button for one second. The printer
restarts the magnetic encoding cycle with a new
card. If the problem persists, call your Evolis resel-
ler for assistance.
■
The print head cooling system is activated.
The printer stops working for a few seconds. As
soon as the print head reaches the normal wor-
king temperature, the activity starts once more
NO CARD IN FEEDER
OR FEEDER NOT PRESENT
WAITING FOR A CARD TO BE
INSERTED
PRINTER CLEANING ALERT
(AFTER 1000 INSERTIONS)
PRINTER CLEANING ALERT
(AFTER 1200 INSERTIONS)
PRINTER COVER OPEN
OUTPUT HOPPER POSITION
MECHANICAL PROBLEM
ENCODING ERROR
COOLING MODE