Card management
Placing the cards in the feeder
Card thickness:
•
Dualys printers admit cards with a thickness of 0.25 mm to 1 mm
.
Advice on card selection:
■
Only use the type of cards appearing in the Technical Specifications in this manual
■
Do not touch the printing surface of the cards, as this would affect the quality of the printing
■
Do not use damaged or folded cards or cards with a raised texture
■
Always keep new cards in a clean, dust-free place
10
1.
Remove the feeder from the printer as shown.
2.
Lower the spring system as shown and
insert 100 cards of 0.76 mm at most.
3.
Put the feeder back in the printer. Then press on
the top of the feeder until it clicks.
max.
max.
max.
