11
Evo Flex Manual
5.2.5 Timer Setting
Click the timer setting key to enter the timer settings and the following interface will appear
EXAMPLE: The unit will start-up at 17:10 and shut-down at 20:10.
KEY NAME
KEY COLOUR
KEY FUNCTION
1 Return
Key
Click this key to return to
the main interface
2
Enable
Timer
ON
Enable: Green ON
Disable: Grey OFF
Click this key to start or turn
off the timed start up
function
3
Enable
Timer
OFF
Enable: Green ON
Disable: Grey OFF
Click this key to start or turn
off the timed start up
function
5.2.6 Setup Interface
Key Name
Key Function
1 Status Key
Click this key to get into the status interface
2 Clock Key
Click this key to set the operational time
function
3 Mute Key
Click to turn on/off silent function and to
set the timing interval function
4 Factory Key
Click this key to get into the factory
interface
5 Curve Key
Click this key to look up the temperature
curve
5.2.7 Setting the Date & Time
From the setup interface, press Clock to enter into the date & time setting interface. Use the arrows to adjust the
date and time as required, then press the Enter button to save changes. Press the return key to return to the
previous interface or press cancel to exit current settings.
Note: in Fahrenheit mode the system date format is: dd/mm/yy
