EVOC P12 Series Manual Download Page 89

Page: 89 / 131

BIOS Setup (Applicable to ECS-1838

motherboard)

· 80 ·

P12 SERIES



Legacy USB Support

This option is used to support legacy USB devices (keyboard, mouse, storage device,

etc). When it is set to Enabled, the USB devices can be used in the OS that does not

support USB, such as DOS. When it is set to Disabled, the legacy devices cannot be

used in the OS that does not support USB.

Note: USB can be used in EFI application, such as in Shell.



EVOC Features

This option provides configuration of EVOC special functions (“FMI” for short).



FMI Configuration

The general switch of FMI function, used to control whether EVOC Features are

supported.



Time Record Support

This option is used to record the operation time of motherboard.



eDisk Support

This option is used to enable or disable eDisk.



eLogo support

This option is used to change bootup Logo. Only when eDisk Support is enabled, can

this function be realized. The format of LOGO image must be BMP, and the file name

Summary of Contents for P12 Series




































































































































Search results

Summary of Contents for P12 Series

Reviews:

Related manuals for P12 Series

Brands by name

Popular brands

EVOC P12 Series, Manual

Search results

Summary of Contents for P12 Series

Reviews:

Related manuals for P12 Series

Brands by name

Popular brands