EVOC P12 Series, Manual

Page: 104 / 131

BIOS Setup (Applicable to ECS-1840 motherboard)
P12 SERIES · 95 ·
 CPU C state Report
C state report OS switch of the CPU

Max CPU C-state
To select C state of CPU,C7 is most energy saving,and C1 is most power
consuming,and so on.

IDE Configuration
SATA Port0
～
1 dynamically detects whether SATA device is connected to the
motherboard.If a device is connected to the corresponding port,the model of the SATA
device will be displayed,otherwise,it shows Not Present.
 SATA Speed Support
SATA control port speed [GEN1/GEN2/GEN3].
 SATA Mode
SATA controller type selection,corresponding to two options:IDE and AHCI.
Please note that when AHCI is selected for system installation,drivers corresponding
to Floppy device and specific chipset may be needed.
 SATA Port0
～
1
Switch of SATA Port,when set to Disabled,the corresponding SATA port cannot be
used.
 SATA Port1 Fuction Select
Please select corresponding interface mode for SATA interface. The default is MSATA,
please do not change, otherwise the HDD cannot be used