EVOC P12 Series, Manual

Page: 73 / 131

BIOS Setup (Applicable to ECS-1837 motherboard)
· 64 · P12 SERIES
SATA Port0 ～ 1 dynamically detects whether SATA device is connected to the
motherboard.If a device is connected to the corresponding Port.the model of the SATA
device will be displayed,otherwise,it shows Not Present.
 SATA Speed Support
SATA control port speed [GEN1/GEN2/GEN3]
 SATA Mode
SATA controller type selection,corresponding to two options:IDE and AHCI.
Please note that when AHCI is selected for system installation,drivers corresponding
to Floppy device and specific chipset may be needed.
 SATA Port0 ～ 1
Switch of SATA Port,when set to Disabled,the corresponding SATA port cannot be
used.
 SATA Port0 Fuction Select
SATA port selects corresponding port mode.PPC family products have 7+15P SATA
PORT as default,and please do not modify it ,otherwise the HDD cannot be used.7P
SATA PORT is only for single board or MEC family product testing.
 Miscellaneous Configuration
 OS Selection
When operating system is installed and used,this optiong needs to be set correctly.For
example,if Windows 7 is installed or used,this option must be set to Windows