EVOC M60 Series, Manual, Page: 96 / 124

Expansion Installation(Applicable to M60-H-01/02/03/M60-E-01 models)
M60 SERIES · 87 ·
Install the HD
2 tighten the screws shown
D case, and
in the picture
3
Close the bottom cover,
and tighten the four sunk
screws on the two sides as
shown in the picture
8.4 Installation/Removal MiniPCI-E, M-SATA
Note: MiniPCI-E, M-SATA all support 3G/4G modules
Preparation Work
Disconnect the PC from power source.
Caution
The el are extremely sensitive to ESD. When
operat ponents, make sure to take proper preventative measures.
Please see the “ESD Guideline” for regulations related to operation of
ESD-sensitive components.
ectronic components on the PCB
ing these com
Removing the MiniPCI-E
、
M-SATA
Steps to remove MiniPCI-E, M-SATA
Loosen the four screws
r
shown in the picture, and
remove the bottom cove
1