EVOC M60 Series, Manual, Page: 100 / 124

Expansion Installation(Applicable to M60-E-2P-01/M60-H-2P-01 models)
M60 SERIES · 91 ·
(The following steps for expansion installation/removal are applicable
to M6 1 models)
8. p
0-E-2P-01/M60-H-2P-0
ening the PC 6 O
Caution
Only authorized and qualified personnel is allowed to open the PC. During
warranty period, the users are only allowed to install expansion memory and
expansion card module.
Caution
The electronic components contained in the PC may be damaged by ESD.
Therefore, please take preventative measures before opening the PC. Please see the
“ESD s related to operation of ESD-sensitive
components.
Guideline” for regulation
Pr ion Work
Isolate the PC from the power source.
Steps to op
eparat
en the PC
1
Invert the chassis, loosen
the four screws on the
pull
the chassis upward to
separate the upper chassis
and lower chassis
two sides as shown in the
picture, and remove the
bottom cover, and
2
terminal as shown in the
e
rear IO panel
Remove the four screws
on the rear IO panel and
the hex studs on the
picture, to remove th