EVOC M60 Series, Manual, Page: 105 / 124

Expansion Installation(Applicable to M60-E-2P-01/M60-H-2P-01 models)
· 96 · M60 SERIES
Caution
The electronic components on the PCB are extremely sensitive to ESD. When
operating these components, make sure to take proper preventative measures.
Please see the “ESD Guideline” for regulations related to operation of
ESD-sensitive components.
Re ov TA
Steps for removing MiniPCI-E, M-SATA
m ing MiniPCI-E 、 M-SA
1
Invert the chassis, loosen
the four screws on the two
and pull the
chassis upward to separate
the upper chassis and
lower chassis
sides as shown in the
picture, and remove the
bottom cover,
2
Loosen the screws sho
in the picture, and rem
the HDD case
wn
ove
3
M-SATA
Remove MiniPCI-E,