EVOC M60 Series, Manual, Page: 24 / 124

Installing the Product
M60 SERIES · 15 ·
3. Installing the Product
3.1 Installation Information
Before installing the PC, please read the installation instructions below:
Attention
When carrying out installation in the switch cabinet, please observe assembly
guidelines and related DIN/VDE requirements, or specific regulations of the
country/region.
3.2 Mounting Method
□ 19 ″ Rack Mount □ Desktop □ Embedded Panel
■ Wall Mount □ VESA Standard Arm □ Portable
□ Others___________
3.2.1 Wall mount
Step: As shown in the left
picture, use screws to fasten the
PC onto the cabinet.
Note: The PC must be placed on
the supporting board or guiding
rail. Do not fasten the PC only by
the screws on the front panel.
Warning
Please make sure the total carrying capacity of the wall or ceiling is at least four
times as much as the total weight of the PC (including cabinet bracket and
accessory expansion modules).