BIOS Setup
EC3-1813CLD2NA(CHENGDU)
· 25 ·
Primary
～
Third IDE Master/Slave
﹡
Type
Not Installed: The system has not detected IDE device
AUTO: The system automatically checks IDE parameter after boot-up
CD/DVD: Used for ATAPI CDROM
ARMD: Used for various analog IDE device
﹡
LBA/Large Mode
Used to configure whether LBA mode is supported.
﹡
Block(Multi-sector Transfer)
Used to set whether multi-sector transfer is supported.
﹡
PIO Mode
Used to set PIO mode.
﹡
DMA Mode
Used to set DMA mode.
﹡
S.M.A.R.T
This option is used to set whether HDD S.M.A.R.T function is enabled. It is
only effective to HDDs which support the function.
﹡
32Bit Data Transfer
This option is used to enable 32bit HDD access mode, which can optimize
HDD read/write speed.
