BIOS Setup
· 30 ·
EC3-1813CLD2NA(CHENGDU)
Spread Spectrum Control
This option is used to control spread spectrum function of clock signals.
Chipset
BIOS SETUP UTILITY
Advanced Chipset Settings
WARNING: Setting wrong values in below sections may
cause system to malfunction.
North Bridge Chipset Configuration
DRAM Frequency [Auto]
Configure DRAM Timing by SPD [Enabled]
Initiate Graphic Adapter [PCI/IGD]
Boot Display Device [CRT+LVDS]
Flat Panel Type [640x480]
User Define Panel Type [Disabled]
South Bridge Chipset Configuration
Onboard Audio Controller [Enabled]
←→
Select Screen
↑↓
Select Item
Enter Go to Sub
Screen
F1 General Help
F10 Save and Exit
ESC Exit
V02.61 (c)Copyright 1985-2006, American Megatrends, Inc.
DRAM Frequency
To configure DRAM frequency. It is recommended to use automatic mode here.
Manually changing the configuration may lead to failure of boot-up because it is
not supported by DRAM.
Configure DRAM Timing by SPD
BIOS configures the timing of SDRAM memory according to the content on the
SPD chip. Most memory modules have a small chip, or SPD chip, which saves
memory timing, capacity, and other parameters
Initiate Graphic Adapter
This option is used to specify prioritized graphic device type for boot-up.
