Page 15
10.2.
Engine Oil replacement.
After engine has been run prior to changing the oil will be very hot.
Wear correct PPE minimum of gloves and overalls.
DO NOT allow any dust, dirt or any other debris enter oil or crankcase.
10.2.1.
Place the machine on a level surface
and warm up the engine for several
minutes. Then stop the engine.
10.2.2.
Remove the oil filler cap (dip stick).
10.2.3.
Place an oil pan under the engine.
Remove the oil drain plug so that the oil
can be completely drained.
10.2.4.
Check the oil drain plug, gasket, oil
filler cap and O-ring. If damaged replace.
10.2.5.
Reinstall the oil drain plug.
10.2.6.
Add engine oil to the upper level,
recommended oil SAE10W/30 or
15W/40, API CH-4/CF/SJ/SL or higher
grade.
10.3.
Air filter
The engine should not be run without the
filter element, piston and/or cylinder wear
can occur.
10.3.1.
Maintaining the air filter in good condition is very
important. Dirt induced through improperly installed,
improperly serviced, or inadequate elements damages
and wears out engines. ALWAYS Keep the element always
clean.
10.3.2.
Remove air filter cover.
Summary of Contents for EVO3100
Page 23: ...Page 23 NOTES ...
