STEP 39: Wiring the Stepper Motors
The four wires from Motor 1 (the pen motor)
go to the area labeled “Motor 1” on the EBB.
Individually insert the four wires into the terminal
block and screw them down. The wire order is:
grey (or brown), green, yellow, pink, bottom to top.
Check that each wire in the terminal is secure by
tugging on it gently; you don’t want them coming
out unexpectedly.
Wire up Motor 2 next. Its four wires go to the
“Motor 2” area of the EBB. Wire order is again
grey (or brown), green, yellow, pink, bottom to top.
[Ostrich EggBot Kit Assembly Guide]
