EYE PROTECTION
Which conforms to ANSI/ CE specifications and provides protection against flying particles both from
the FRONT and SIDE should ALWAYS be worn by the operator and others in the work area when
connecting to air supply, loading, operating, or servicing this tool. Eye protection is required to guard
against flying fasteners and debris, which could cause severe eye injury. The employer and/or user must
ensure that proper eye protection is worn. Eye protection equipment must conform to the requirements
of the ANSI Z87.1 and 89/686/EEC, and provide both frontal and side protection.
TO PREVENT ACCIDENTAL INJURIES
．
Never place a hand or any other part of the body in the discharge area of tool while the air supply is
connected.
．
Never point the tool at anyone else.
．
Never engage in horseplay.
．
Never pull the trigger unless the nose is directed at the workpiece.
．
Always handle the tool with care.
．
Do not pull the trigger or depress the trip mechanism while loading the tool.
OPERATION : FASTENER LOADING
NOTE
Non-side shielded spectacles and face shields alone do not provide adequate protection.
13
