EVERVIEW Diamon Series User Manual Download Page 98

Page: 98 / 236

User Manual of Network Video Recorder

6.2

Auxiliary Functions of Playback

6.2.1

Playing Back Frame by Frame

Purpose:

Play video files frame by frame, in case of checking image details of the video when abnormal events happen.

Steps:

•

Using a Mouse:

Go to Playback interface.

If you choose playback of the record file: click button

until the speed changes to Single frame and one click

on the playback screen represents playback of one frame.

If you choose reverse playback of the record file: click button

until the speed changes to Single frame and

one click on the playback screen represents reverse playback of one frame. It is also feasible to use button

toolbar.

•

Using the Front Panel:

Rotate and hold the outer ring on Jog Shuttle counter clockwise (for NR500) or click the

button to set the

speed to Single frame. One click on

button, one click on the playback screen or Enter button on the front panel

represents playback or reverse playback of one frame.

6.2.2

Smart Search

Purpose:

In order to locate events easily and accurately in the playback progress bar, you are allowed to analyze a certain

area (scene) dynamically, and to get all the related events that occurred in this area. The supported smart search

rules include intrusion detection and motion detection.

Before you start:

To get the smart search result, the corresponding event type must be enabled and configured on the IP camera.

Here we take the intrusion detection as an example.

You may enter the motion detection configuration interface by Configuration> Advanced Configuration>

Events> Intrusion Detection.

Figure 6. 22

Setting Intrusion Detection on IP Camera

Configure the required parameters of intrusion detection, including area, arming schedule and linkage

methods. Refer to the user manual of smart IP camera for detailed instructions.

Steps:

Enter the Smart Playback interface and play a record file. Refer to

Chapter 6.1.5

for the details.

Summary of Contents for Diamon Series













































































































































































































































Search results

Summary of Contents for Diamon Series

Reviews:

Related manuals for Diamon Series

Brands by name

Popular brands

EVERVIEW Diamon Series, User Manual

Search results

Summary of Contents for Diamon Series

Reviews:

Related manuals for Diamon Series

Brands by name

Popular brands