570NAT-HW-X19
High Density Network Address Translator
Page - 34
Revision
1.0
allows users to change the routing from the default shown in Figure 1-2. This routing can be done using
‘grid’, ‘directed’ and ‘tiled’ views, descbired below.
A given processing core cannot contribute its Tx traffic to more than one WAN port.
Correspondingly, a given processing core cannot receive traffic from more than one
WAN port.
When changing routes, it is important to select ‘Apply’ in the ‘To Perform’ menu for the changes to be
applied.
To import a route from compatible router settings file (in .json format), select ‘Import’ from the ‘To Perform’
menu.
Figure 4-15 : WebEASY
®
- Link Aggregation \ Import Route
Selecting ‘Import’ will open an options menu prompting the user to select how existing routes are handled.
‘Merge’ will add imported routes but will not un-route current routes, in cases of conflicting routes the
current route will be kept and the imported route ignored. ‘Over-Write’ will both route and un-route, all
existing routes will be unrouted and the routing will be set exactly as it is in the imported router settings
file. Selecting ‘Ok’ will cancel import.
