3067VIP10G Series User Manual
JPEG2000 Advanced Compact Multi-Image Display Processors
Page 32
Revision 0.1
Output Resolution:
This parameter sets the allows the user to set the resolution for the Output control
to either v720p/59.94 or 1080p/59.94.
Layout:
This parameter sets the layout information from the following options: Full Screen, Mode 2x2,
Mode 3x3, Mode 4x4, or Advanced Mode for use with the Magnum Multiviewer Design tool.
Output Rotation:
This parameter enables or disables portrait mode for Output Control. Rotation can
be set to the following degrees; 0º, 90º, or 270º.
Output Refresh Rate:
This parameter sets the Bit rate for the output video Elementary Stream.
SFP Port Output IP Address:
This parameter allows the user to select the input IP address or
Multicast address for both SFP ports 1 and 2.
SFP Port Output Port:
This parameter allows the user to select the output UDP port numbers for both
SFP ports 1 and 2. Range for these values can be from 1 to 65535.
Total Transport Stream (TS) Bit Rate (Kbps)
This parameter allows the user to select the output TS
Bitrate, which is expressed in kbps. The Card will adjust the bitrate for video and other PIDS based on
this settings.
Note: 1.) For ENC10bit 4:2:2 H264 range is 0 to 100000
2.) For ENC 8bit 4:2:0 H264 range is 0 to 20000
3.) For ENC J2K range is 0 to 400000
Video Bitrate:
This parameter allows the user to select the output TS Bitrate, which is expressed in
kbps. The Card will adjust the bitrate for video and other PIDS based on this settings.
Note: 1.) For ENC10bit 4:2:2 H264 range is 0 to 100000
2.) For ENC 8bit 4:2:0 H264 range is 0 to 20000
3.) For ENC J2K range is 0 to 400000
PMT PID:
This parameter allows the user to select the PMT PID for the output stream. Range for this
value can be from 16 to 8190.
Video PID:
This parameter allows the user to select the Video PID for the output stream. Range for this
value can be from 16 to 8190.
VANC PID:
This parameter allows the user to set the PID for VANC data being sent on ENC J2K and
ENC 10bit 4:2:2 H264. Range for this value can be from 16 to 8190.
PCR PID:
This parameter allows the user to set the PID for PCR data being sent on ENC J2K and ENC
10bit 4:2:2 H264. Range for this value can be from 16 to 8190.
Input Select:
This parameter allows the user to select the audio inputs from 1 through 32.
PID Assignment:
This parameter allows the user to either define the PID assignments based on
Inputs, or Manually.
