3067VIP10G Series User Manual
JPEG2000 Advanced Compact Multi-Image Display Processors
Page 18
Revision 0.1
Program Number Select:
This parameter allows the user to select the program that is going to be
decoded. This is only applicable when
Program Tuning Mode
is set to
Auto PID Select
. Range for
this value can be set from 0 to 65535.
PID Select Mode:
This parameter allows the user to select which audio PID will be embedded by the
decoder into the video output, and can only be applied when
Program Tuning Mode
is set to PID
Select. Range for this value can be from 2 to 8190. When this setting is applied, if any of the selected
PIDS have been duplicated the user will be alerted with an ‘error’ message.
Note: 0, 1, and 8191 are reserved PIDS in MPEG so they are not included within
the value range.
Audio Select:
This drop down box allows the user to select the specific Audio PID from audio 1
through 8, being configured for Audio Program Control.
Audio Program Number:
This parameter allows the user to select the program that is going to be
decoded. This is only applicable when
Program Tuning Mode
is set to
Auto PID Select
. Range for
this value can be set from 0 to 65535.
Service Name Select:
This parameter allows the user to define the name the program for the audio
service control.
Language:
This parameter allows the user to specify the language that will be viewed on the program
for the audio service control. By Default language is set to English.
Load Factory Config:
This parameter allows the user to load the standard factory settings for the
3067VIP10G, without any user modifications.
Reboot:
This parameter enables a soft reset of the system.
