2430RX-J2K-IP
JPEG2000 to HDMI Converter User Manual
Page - 20
Revision 0.1
Port Link Status:
This parameter returns the status link for data port 1, in either an ‘UP’ or ‘DOWN’
state.
Received Data Ethernet Total Bitrate:
This parameter displays the bit rate received on this Ethernet
port is represented in kbps, and the value can range from 0 to 1000000000.
Transmitted Data Ethernet Total Bitrate:
This parameter displays the bit rate transmitted on this
Ethernet port is represented in kbps, and the value can range from 0 to 1000000000.
6.2.
DECODER INPUT CONTROL
Figure 6-2: Web GUI Decoder Input Control Tab
Input Stream State:
This parameter will display whether or not the card is currently receiving anything
on the input. The input stat of the card will be either Active or Inactive.
Input Port Select:
This parameter allows the user to set the physical interface to receive data from
either data port 1 or data port 2.