69
Electrical System
Typical Helm Electronics Display Panel
Switches
Accessory switches are integrated into the elec-
tronic display panels at the helm. Switches are
organized in categories that are displayed on the
menu on the starboard side of the screen.
The switches are typically activated by touching
one side of the switch icon to activate the acces-
sory and pressing the other side of the switch to
turn it off. LED lights in each switch icon illuminate
to indicate the circuit is activated.
Notice:
Some switches in the helm switch panels may
be duplicated in the electronics display panel
for convenience. Switches displayed may
vary depending on options selected and fac-
tory programing. Your boat may be equipped
with additional switches not mentioned.
The following is a description of accessory switches
typically controlled by touchscreen switches in the
electronics display panel:
Docking Lights
Activates the lights in the hull on each side of the
bow that illuminate the area in front of the boat
for better visibility when docking at night.
Helm Light
Activates the red overhead map lights above the
helm.
Nav Lights Underway
Activates the navigation lights.
Nav Lights Anchor
Activates the anchor light.
Underwater Lights
Activates the LED underwater lights in the stern
below the waterline.
Fresh H2O Pump
Activates the pump that supplies water pressure
for the fresh water system. The pump is the pres-
sure demand type. A pressure switch automati-
cally controls the water pump when the system
is activated and properly primed.
Raw H2O Pump
Activates the raw water washdown pump that sup-
plies the washdown hose in the cockpit. The pump
is the pressure demand type. A pressure switch
automatically controls the water pump when the
system is activated and properly primed.
Aft Bilge 1
Manually activates the aft bilge pump located
in the aft systems compartment bilge near the
transom. The pump moves water out a thru-hull
fitting in the hull. The pump is also activated by
an automatic switch whenever the batteries are
connected. This pump will run as needed when-
ever water in the bilge accumulates high enough
to be activated by the automatic switch and turn
off when the water is removed.
Aft Bilge 2
Manually activates the aft emergency bilge pump
located behind the aft bilge pump in the aft sys-
tems compartment bilge near the transom. The
pump moves water out a thru-hull fitting in the
hull. The pump is also activated by an automatic
switch whenever the batteries are connected. This
pump will run as needed whenever water in the
bilge accumulates high enough to be activated by
the automatic switch and turn off when the water
is removed.
Typical Switches in the Helm Switch Touchscreen Display
Summary of Contents for 455 CC
