Everglades 455 CC, Owner'S Manual

Page: 77 / 200

77
Electrical System
Digital DC Electrical System Control
Output Module Circuit Protection
Accessory circuits activated by the digital switches
are protected by circuit breakers located in the
output modules. The circuits controlled by each
module are numbered and labeled for the acces-
sory activated and protected by the module.
Most circuit breakers and control modules are lo-
cated behind the removable access door above the
galley sink in the cabin or on the forward systems
compartment bulkhead. To reset a circuit breaker
in a control module, use the arrow buttons to scroll
to the circuit with the blown breaker. Then press
the RESET/AUTO switch to reset the breaker.
In addition to circuit protection, the control mod-
ules are equipped with a manual circuit bypass
feature that allows any circuit controlled by an
output module to be activated manually.
To bypass the controller and activate a circuit
manually, use the arrow buttons to scroll to the
circuit that needs to be activated. Then press the
MAN ON/MAN OFF switch to activate the circuit.
Press the MAN ON/MAN OFF switch again to de-
activate the circuit.
Digital Control Module
Circuit Breaker Reset & Manual Override Switches
Digital Switch Control Modules & Main Circuit Breakers
Refer to the Garmin digital switching system op-
eration manual for additional information on the
digital switching system.