Everglades 320 EX, Owner'S Manual

Page: 91 / 170

91
Raw Water System
• Lubricate the seal.
• Reassemble the strainer making sure that the
bowl is tight.
• Open the seacock and check for leaks.
• Start the generator and inspect the strainer
for leaks and proper water flow at the exhaust
port. If there is no discharge within thirty
seconds, shut down the generator and find
and correct the problem.
Cleaning the Air Conditioner Strainer
• Turn off the air conditioner and deactivate the
air conditioner circuit breaker on the cabin AC
panel.
• Close the intake water ball valve at the raw
water manifold.
• Turn the strainer bowl counterclockwise to
remove it and remove the screen.
• Thoroughly flush the screen and the inside of
the strainer bowl to remove foreign matter.
• Lubricate the seal.
• Reassemble the strainer making sure that the
bowl is tight.
• Open the seawater ball valve and check for
leaks.
• Activate the air conditioner and monitor the
flow of water out of the air conditioner thru-
hull fitting in the hull side. If no water is
flowing after 30 seconds, shutdown the air
conditioner and find and correct the problem.
Air Conditioning Raw Water Strainer
and Generator Cooling system Strainer
AIR CONDITIONER
PUMP STRAINER
GENERATOR
SEA STRAINER
Generator Sea Strainer