EPRO NVR Series
87
5.4.2
Record
You can configure the record settings on this page.
5.4.2.1 Record Settings
You can configure the basic record settings on this page.
Channel:
Select a channel to configure the record setting individually.
Record:
Select
Enable
to enable the record function.
Stream Mode:
Select
Main Stream
or
Sub Stream
to record on this channel.
Pre-Record:
Select
Enable
to enable pre-recording for motion detection or I/O trigger record.
Copy:
You can apply the same configurations from one channel to the desired channels. Click
the
Copy
button, the below channel selection field appears. Select a desired channel (or All),
click the
Copy
button, the selected channel(s) will be applied with the same configurations.
Click
Save
to save the settings or
Refresh
to refresh the page.
