EPRO NVR Series
122
Password:
Input the password of the sender. Note that this column cannot be blank.
Sender:
Input the Email address of the sender. Note that the email format should be
Receiver1:
Input the Email address of the receiver. Note that the email format should be
Interval:
Configure an interval to send Emails when events occur.
b.
On the
Motion
or
Alarm
page, configure the desired settings and then enable
Send Email
.
Click
Save
to save the settings.
2.
On the Genie XMS:
a.
On the NVR device Maintain page, configure the related settings and then input the
Network ID
. The Network ID is the IP address of the NVR.
