- 9 -
(6
r Upwards/Downwards. This is used to
left. This is used to select or adjust the parameters of the selected item.
s
(7) Power & HD-CCTV
Video pigtail cable
tail cable
s
llowing EverFocus products which are recommended for use with the
L
N220 5.6 inch LCD Test Monitor
3. INSTALLATION
This chapter will describe, in general terms, how to install the EHH5200 camera.
ng Camera:
3.1.1
3.2
position. See 3.2.1
after installation. See 3.2.4
arning
To prevent electrical shock, turn off the electrical power before making electrical connections.
e
it while open
in wet areas. Once properly installed and sealed, the dome is IP66 rated against
water infiltration.
) OSD Menu joystick:
Use the joystick to move the curso
select the item to be set.
Tilt the stick to the right or
Press in on the stick to enter the setup menu. If the item has its own setting menu (sign ), pres
the stick again to display the sub- menu.
Connect power and HD-CCTV video to pig
2.3 Related Product
In addition, you may order the fo
camera to achieve the best performance:
Type Bracket: BA-EDMS
E
STEPS:
3.1. Mounti
1. Drill the Holes. See
2. Mounting: See 3.1.2
. Adjusting Camera:
1. Adjust the camera
2. Adjusting Zoom and Focus See 3.2.2
3. Camera Setting. See 3.2.3
4. How to close camera cover
W
Do not expose the camera to water or moisture while open during installation, nor try to operat
