EverFocus EFC302, User Manual

Page: 120 / 160

NAV IP Access controller
111
when a card is swiped at any door at which it does not have the right to pass. The controller
generates alarm output(s) according to the setting in the “Invalid Door” column.

Invalid Time: Each card belongs to an access group. For each group, the system can assign
access rights to certain doors for certain time zones. An invalid time event will be generated if
a card is swiped during a time period in which it does not have the right to pass. The controller
generates alarm output(s) according to the setting in the “Invalid Time” column.

APB Fail: If the card APB property is enabled, and door behavior under APB is set to “unlock”.
A cardholder will be able to enter/exit any doors by swiping the card. The system generates
an APB fail event if an APB event is triggered. The controller generates alarm output(s)
according to the setting in the “APB Fail” column.

Card PIN Fail: A card PIN fail event is generated when a PIN ‐ enabled card is presented at a
reader and an incorrect PIN is entered three times consecutively. The controller generates
alarm output(s) according to the setting in the “Card PIN Fail” column.

Door Forced Open: A door forced open event is generated when the door sensor indicates to
the controller that a door is opened, but no legitimate card has been presented and a
Request ‐ to ‐ Exit button has not been pressed. The controller generates alarm output(s)
according to the setting in the “Door Forced Open”. In practice, a door forced open event will
be generated if a door is kicked open.

Door endures Open: A door endures open event is generated if a cardholder enters endures
PIN to unlock a door when under endures. The controller generates alarm output(s) according
to the setting in the “Door endures Open”.

Door Held Open/Overtime: the system keeps tracking of the door status when a card is
presented to a reader or Request ‐ to ‐ Exit button is pressed. A door held open/overtime event
occurs when a door is held open for longer than the allowed door held open time. The
controller generates alarm output(s) according to the setting in the “Door Held Open” column.

Reader Lost: A reader lost event is generated when the controller detects that the card reader
appears to have been disconnected from the system. The controller generates alarm output(s)
according to the setting in the “Reader Lost” column.

Panic door: When an access denied appears and request open did not implement, however,
door magnetic sensor is displayed the door have been opened, it will lead a “panic door”
event. The controller generates alarm output(s) according to the setting in the “Panic Door”
column.
Steps:
1) Click the “Alarm Action” tab page
2) Select an alarm to be set in alarm list.
3) In the corresponding, click the position to show drop ‐ down menu of alarm output,
select the output value: R, Y, N.
4) Click the “Save” button to save your changes.
12.1.5.5 Alarm Time
On the alarm time setting page, users can set the alarm time for the specified controller.