EverFocus EFC302, User Manual

Page: 115 / 160

NAV IP Access controller
106
Door Location: Description of the door location.
Door Unlock Time: Set the door open time when a valid card is swiped or the Request ‐
to ‐ Exit button is pressed. The door remains open as long as the RTX button is pressed
down. The door open time does not count until the button is released. If two cards are
swiped successively, the door open time does not count until the second card has
been swiped. The default time is 3 seconds. The maximal door open time is 59999
seconds.
Door Held Open Time: Door sensor monitors the open/close status of a door. If
“unlock” is not set by the system (door is normally considered closed), then door
should close after opening. It is considered abnormal if controller does not receive the
door close signal from door sensor for a reasonable amount of time after the door is
opened. This time period is call door held open time or door over time. According to
this setting, the controller will determine whether to generate an alarm or not after
the door sensor timeouts. The default value of door held open time is 5seconds. The
maximal door held open time is 59999 seconds.
Steps:
1) Select the door page.
2) Click the door which needs to be set.
3) Input door information including: door location, unlock duration, held open
duration, interlock etc. If two or more doors are interlocked, they cannot be
opened the same time. If one of the interlocked doors is open, the other doors
cannot be opened until the first door is closed. In short, there can be only one
door open at any time point among interlocked doors. User can set interlock
function when an interlock compatible controller controls two or more doors. This
setting is particularly suitable to environment that requires high ‐ level security,
such as banks and prisons.
4) Click the “Save” button to save your changes.
12.1.5.2 Reader
Settings page for the reader number, name, door location, keypad reader, system reader, input time for
keypad, in/out type, source and destination area etc.