EverFocus EDVR16D1/250, Instruction Manual

Page: 34 / 155

24
24 24
24
Example:
EDVR9F1/D1 with 12 installed cameras, at 720 x 240 resolution:
60 IPS / 12 cameras = 5 IPS
Therefore the maximum adjustable recording rate per camera is 5 IPS.
EVENT
IPS recording rate for motion or alarm events. Event record speed can be set from 1 to
30 IPS (25 for PAL) or “OFF”.
Note: In order to activate a new record speed, you need to disable all current record
actions and then turn them back on.
ACTION
Set “ ON ” to activate TP of motion action.
Set “ OFF ” to disable TP of motion action.
This setting correlates closely with Motion Setup. If motion setting is disabled, motion
detection will not function regardless if TP (Time Period) Action in Camera Setup Menu
is ON or OFF.
However, if Motion setting is enabled , then motion detection function works depending
on Action setting in Camera Setup Menu. All motion actions (including buzzer, relay,
network alarm, e-mail and log) will be triggered if they are enabled in Motion Setup
Menu as long as Action is “
ON ” for the TP (Time Period) you have set. If you do not
wish to have motion detected for a specific time, set Action “ OFF ” for that Time Period.
This function gives you flexibility to set motion detection function ON or OFF for
different Time Periods.