EAN7360 / EHN7360 / EZN7360
63
4.
Select a sensitivity level of the motion detection function from the
Sensitivity
drop-down list.
5.
Check the
Enable
box to enable the motion detection function.
6.
Set up schedules to active the motion detection and send alarm notification. Check the box of
the desired section to configure the schedule, and enter a start / end time in the fields for the
section.
7.
Set up event reactions for the motion detection function. Check the box of the desired
reaction (Email, Alarm output, Snapshot, Record or Audio Output) to link with the function.
Email:
Check the box to enable transmitting the alarm notification to the mail server. To
configure Email settings, see
7.3.2.1 Email Settings
.
Alarm Output:
Check the box to enable triggering the external alarm device.
Trigger Alarm Output Duration Time:
Enter the alarm output duration time (between 10
and 3600 seconds).
Alarm I/O Settings:
Select
Normal Open
or
Normal Close
from the drop-down list.
Snapshot:
Check the box to enable taking snapshots to the micro SD Card when an event
occurs. You can further configure the Snapshot settings including
Snapshot Interval
and
Snapshot No.
. For example, if you set up the
Snapshot Interval
to 5 and
Snapshot No.
to
3, system will take 3 snapshots every 5 seconds.
E-mail:
Check the box if you want the camera to send an email notification to the email
address entered in the Receiver Address field (see
7.3.2.1 Email Settings
).
FTP:
Check the box if you want the camera to upload the snapshots to the FTP server
entered in the FTP server field (see
7.3.2.2 FTP Settings
).
Record:
Check the box to enable recording to the micro SD Card when an event occurs.
E-mail:
Check the box if you want the camera to send an email notification to the email
address entered in the Receiver Address field (see
7.3.2.1 Email Settings
).
FTP:
Check the box if you want the camera to upload the snapshots to the FTP server
entered in the FTP server field (see
7.3.2.2 FTP Settings
).
Audio Output:
Check the box to enable triggering the audio output.
After complete the settings, click
Save
to apply the settings.
