EAN7360 / EHN7360 / EZN7360
62
7.3.
Event Settings
You can set up the Motion Detection event or Tampering Detection event to automatically notify the
users when an event occurs. You can also set up a schedule to automatically record the videos or take the
snapshots.
7.3.1.
Event
7.3.1.1.
Motion Settings
Use this page to configure the area in which motion will be detected, and set up schedules to
active alarm functions. When a motion is detected by the camera, the alarm icon
at the top
of the Live View window will turn red and blink
to alert the user. Up to four Motion areas
can be configured.
To set up a Motion Detection area:
1.
Click the
Draw Mask Area
button. On the preview window, move the cursor to the position
where you want the mask rectangle to start and then click it. Move the cursor to the position
(diagonally opposing corner) where you want the mask rectangle to end and then click it.
2.
You can cover the whole image by clicking the
Select All
button.
3.
You can remove the configured mask by clicking the
Clear
button.
