Page | 4
AP1004WRe Installation Guide
•
The outer set of mounting holes are 100 mm apart in both the
horizontal and vertical directions and are tapped with a M6 x 1.0 mm
thread pattern to a depth of 10 mm.
Third-party systems must be capable of safely supporting the AP1004WRi Wireless
Access Point.
The exposed screw length (exclusive of mounting bracket thickness and any
washers or locking devices) cannot exceed 10 mm so as to avoid any damage to the
chassis.
Apply a drop of LocTite 243 threadlocker adhesive on each shoulder screw
before inserting into the chassis to prevent loosening, leakage, and corrosion.
Summary of Contents for AP1004WRi
Page 2: ...Release Number 1 4 ...
