Instruction manual for POWERLINE 33 series UPS
2010/06/22
www.ever.eu
26
ASSEMBLY
When selecting the place of installation, consider the weight of the device. The UPS
should only be used in rooms where the dust, temperature, and humidity levels are
within the device specifications. Appropriate cooling conditions must be ensured for
the UPS to work properly. For this reason, the ventilation openings of the UPS must
be uncovered at all times, and the distance between the UPS and other objects
should not be less than 30 cm.
NOTE! It is forbidden to install the device near flammable
materials!
Once positioned, use two additional assembly fixtures to increase its mechanical
stability. To do this, loosen the 4 M8 screws located in the central bottom part of the
device. Place the fixtures carefully and screw them to the device by using the
previously removed screws.
Figure 6 Assembly grips
Detailed information is provided in a separate installation guidelines document that is
enclosed with the product.
BATTERY PACK (optional)
POWERLINE 33 units also allow for the connecting of additional battery packs. The
battery packs can be connected to the connection terminal clips at the back panel.
Additional battery packs will extend the battery mode work time. The battery packs
have additional safeguard located on the rear panel.
NOTE! If the safeguard fuse link is damaged, replace it with a new
one that is compliant with the device specification.
