Instruction manual for POWERLINE 33 series UPS
2010/06/22
www.ever.eu
38
WORK WITH COMPUTERS
USB AND RS232 COMMUNICATION
The user can change the parameters of the unit both from the interface (LCD)
and via dedicated computer software.
POWERLINE 33 series units are equipped with extended management functions.
There are two RS232 and USB communication ports and PowerSoft Personal
software provided with the UPS. To ensure correct communication, it is necessary to
connect the unit to a free computer port by using a provided communication cable.
Once connected, turn the computer on and install the software by proceeding in line
with the enclosed manual or software instructions (applies to Microsoft Windows).
NOTE! Only one port can be used at any given time.
RS232 and USB ports are plated to ensure separation from the other unit blocks.
SNMP/HTTP NETWORK MANAGEMENT CARD
An EVER network management card is optional and can be installed by the
user. It is a device that is used to integrate the UPS with the Ethernet-type computer
network. The network card is located in the special slot on the back wall of the UPS.
The network card enables the user to manage the UPS from any computer in the
network. This solution is most often used for the central power supply, or if there is a
need to manage the power supply system remotely.
The network management card features the following services:
•
SNMP agent enables power supply management with software called SNMP
manager;
•
HTTP server enables the display and modification of the UPS parameters in
an Internet browser;
More information about the network card is in the card manual.
NOTE! A connected SNMP card disables communication with
RS232, USB, and PowerSoft Personal.
