Eventide Space Page 42 User Manual Download

Page: 42 / 50

User Guide System Mode

Press the Right Footswitch to select the Preset field (indicated by the flashing Right Footswitch

LED) and turn the Encoder to select the Preset.

To map another Prg No. to another Preset, simply press the Left Footswitch again to select

the desired Prg No. and then the Right Footswitch to map it to the desired Preset.

Default map: Prg No. 0-99 map to the 100 Presets (1-100).

As well as using MIDI program change to load a preset, it can also be programmed to directly

control the unit’s BYPASS setting. When the Right Footswitch LED is flashing, turn the

Encoder counter-clockwise to select one of the following:

OFF

Unassigned

BYPASS

BYPass

the

unit

ACTIVE Make the unit Active, i.e., not bypassed.

TOGGLE Toggle the between bypass and active.

Press the Middle Footswitch once to back-up one level to MIDI menu.

Press the Middle Footswitch twice to go to the top level System menu.

[XMT MAP] – Create a MIDI Program Change Transmit Map

In Preset Mode, when the Left Footswitch loads a Preset, a MIDI Program Change message

can be transmitted from the MIDI Out jack or USB to control an external device - e.g., another

Eventide Stompbox, an Eventide Eclipse, an Eventide H8000FW, etc.

To Create a MIDI Program Change transmit map, Press the Encoder to access the MIDI

transmit map for editing.

The Left field displays the Preset number (1 to 100). The right field displays either OFF or the

Prg No. (0-127). Default map: Prg No. 0-99 map to the 100 Presets.

Press the Left Footswitch to select Preset field (indicated by the flashing Left Footswitch LED),

turn the Encoder to select the Preset.

Press the Right Footswitch to select Prg No. field (indicated by the flashing Right Footswitch

LED), turn the Encoder to select the corresponding number.

Note: MIDI Program Change Transmit must be enabled in order for

to transmit

Program Change messages. MIDI Program Change Transmit is turned ON or OFF in the MIDI

menu. Default is OFF.

Note: When a

Preset is recalled with a MIDI program change message, MIDI Program

Change messages are not generated.

Press the Middle Footswitch once to back-up one level to MIDI menu.

Press the Middle Footswitch twice to go to top level System menu.

[CTL XMT] – MIDI Continuous Controller Transmit Enable

(ON,

OFF

)

Press the Encoder to select. Turn Encoder to set MIDI Continuous Controller transmit ON or

OFF. This setting determines if Parameter Knobs transmit MIDI control messages.

Press the Middle Footswitch once to back-up one level to MIDI menu.

Press the Middle Footswitch twice to go to top level System menu.

Summary of Contents for Space



















































Search results

Summary of Contents for Space

Reviews:

Related manuals for Space

Brands by name

Popular brands

Eventide Space, User Manual

Search results

Summary of Contents for Space

Reviews:

Related manuals for Space

Brands by name

Popular brands