User Guide Algorithms
20
Mix – [VERBMIX]: wet/dry between reverb and tremolo dry signal
Decay – [DECAY]: decay in seconds or note-based in Tempo Mode
Size – [TENSION]: goes from more tension (all the way left) to less tension (all the way right)
Delay – [NUMSPR]: number of springs in the "tank," mixes in 1 to 3 springs
Low – [LO-DAMP]: turning knob left increases the damping frequency for the low end
(turning knob right gives more low end). The low damping frequency effectively chokes the
decay of everything below this frequency.
High – [HI-DAMP]: turning knob left decrease the damping frequency for the high
end (turning knob right gives more high end). The high damping frequency effectively chokes
the decay of everything above this frequency.
Contour – [RESONANCE], metallic resonance at the [HIDAMP] frequency
FXMIX – [MOD-LVL]: mixes in modulation for a nice chorusing
Ynob – [TR-SPD]: input tremolo speed in Hz or note-based in Tempo Mode
Xnob – [TREM-INT]: input tremolo intensity or depth (tremolo is pre-reverb)
DualVerb
DualVerb combines two different high quality studio reverbs (A and B) with independent
controls for decay, size, pre-delay, and EQ. Mix between both for rich, dense stereo
reverberation, or use this effect to smoothly transition between two entirely different reverb
sounds.
Mix – [MIX]: wet/dry mixer, 100% is all wet signal
Decay – [A-DCY]: decay for reverb A in seconds or note-based in Tempo Mode
Size – [SIZE]: adjusts the size of both reverbs A and B to give many different size combos with
one knob
Delay – [A-PDLY]: pre-delay for reverb A in milliseconds or note-based in Tempo Mode
Low – [A-TONE]: Tone for reverb A, left is darker, right is brighter
High – [B-TONE]: Tone for reverb B, left is darker, right is brighter
Contour – [RESN]: Resonance mixer for A and B Tone knobs, allows some combinations of
different resonances for [A-TONE] and [B-TONE]. This will affect the sound as long as [A-
TONE] and [B-TONE] are not both set to 0.
FXMIX – [ABMIX]: mixer for A and B reverbs, in stereo this mixes stereo channels, and all the
way right results in dual mono reverbs (A on left, B on right)
Ynob – [B-PDLY]: pre-delay for reverb B in milliseconds or note-based in Tempo Mode
Xnob – [B-DCY]: decay for reverb B in seconds or note-based in Tempo Mode
Reverse
?neht siht lla s’tahW A true reverse reverb followed by a forward reverb with delay and
feedback. Turn [SIZE] and [FEEDBACK] all the way down for a straightforward tempo-sync-
able rush-up reverse reverb, use [SIZE] to dial in a second reverb for increased wetness, and
add [FEEDBACK] around the whole thing for other-worldly ambiance.
Mix – [MIX]: wet/dry mixer, 100% is all wet signal
Decay – [DECAY]: reverse decay in milliseconds or note-based in Tempo Mode (also the delay
amount for [LATE DRY])
Size – [SIZE]: mixes in a standard reverb that is post reverse section for bigger sounds
Delay – [FEEDBACK]: amount of delay feedback around reverse reverb (delay amount is
DECAY amount)
Low – [LOW-LVL]: shelving boost/cut of low frequencies
High – [HI-LVL]: shelving boost/cut of high frequencies
Contour – [CONTOUR]: increase the span between low and high crossover frequencies for the
[LOW-LVL] and [HI-LVL]. This will affect the sound as long as [LOW-LVL] and [HI-LVL] are not
both set to 0.
Summary of Contents for Space
Page 2: ......