69
•
DO NOT
lubricate or immerse in water the Lower
Anchor Connectors, the buckle, or any other part
of this child restraint, unless rinsing is permitted, as
stated on the back of the buckle for your restraint.
• Plastic and metal parts may be wiped clean with
mild soap and water and dried with a soft cloth. Do
not use abrasive cleaners or solvents.
• Take care not to damage any labels.
• The harness can be wiped clean with mild soap and
water. Allow harness to air dry.
• Machine wash the seat pad separately in cold water,
delicate cycle. Tumble dry 10 to 15 minutes on low
heat.
•
NEVER
use child restraint without the seat pad.
• To protect the child restraint from damage caused
by weather, rodents, and other elements common to
garages, the outdoors, and other storage locations,
remove the seat pad and thoroughly clean the
restraint and pad prior to storage. Take care to clean
in the areas where crumbs and other debris tend to
accumulate.
To help protect the
vehicle upholstery, place
a towel beneath and
behind the child restraint.
Gener
al
When this child restraint reaches the expiration date
found on the date of manufacture label, Evenflo
encourages you to dispose of it properly. Most
components of this child restraint are recyclable.
1. Remove all fabric and padding.
2. Remove all screws and disassemble the restraint.
3. Recycle all fabric, padding, plastic, foam and metal
parts, if accepted by your local recycling center.
Responsibly discard the rest.
If your local recycling center won’t accept the padding,
you may dispose of it in the landfill.
To prevent injury due to hidden damage, lost
instructions, outdated technology, etc., discontinue use
of this restraint after the expiration date on the label or
if it has been involved in a crash.
Care and Cleaning
Proper Disposal of this Child Restraint
T
IP
!
T
IP
!
