37
For
w
ar
d-
facing
To install this child restraint properly in the forward-
facing position, the Lower Anchor Connector Assembly
MUST
be in the forward-facing belt path. If the Lower
Anchor Connector Assembly is in the rear-facing belt
path, use the following procedures to move it to the
forward-facing belt path.
To access the Lower Anchor Connector Assembly, you
will first need to:
• Loosen internal harness straps (p. 58);
• Disconnect Lower Anchor Connectors (p. 20-22);
• Remove the seat pad (p. 62).
Moving Lower Anchor Connectors to the
Forward-facing Belt Path
1. Remove Lower Anchor
Connectors from the rear-
facing belt path.
2. Place each Lower Anchor
Connector in the forward-
facing belt path.
Pull the harness strap out
of the way and insert a
Lower Anchor Connector,
behind the straps, into
the forward-facing belt
path opening, as shown.
Repeat on the other side.
