manualshive.com logo in svg

Evenflo Symphony All-in-One, Owner'S Manual

Share
Download
Evenflo Symphony All-in-One Owner'S Manual Download Page 64

64

Buckle/Crotch 

Strap

Aircraft 

Seat Belt

Rear-facing 

Belt Path 

Opening

Installing Child Restraint in Aircraft

 buckle

storage

Aircraft 

Seat Belt

IMPORTANT:

 Before installing the child restraint, make 

sure the 

aircraft seat is in a fully upright position

. 

Note

: You may need to route the Lower Anchor 

Connector Assembly through the forward-facing belt 

path, if it interferes with the aircraft seat belt (p. 37-38). 

After landing, refer to page 24 for vehicle installation.
1.  Place the child 

restraint in 

position.
Adjust the child 

restraint to its 

most reclined 

position 

(Recline 

Position #1, p. 

62), then place 

it on the aircraft 

seat rear-facing. 

2.  Route aircraft seat belt through rear-facing belt path.

Unhook the front of the child restraint’s seat pad and 

move it out of the way. Route the aircraft seat belt 

buckle through the rear-facing belt path opening on 

one side and continue through the opening on the 

opposite side of the child restraint, as shown.

IMPORTANT:

 For aircraft use 

ONLY

, make sure the 

aircraft seat belt is positioned 

in front of

 the buckle/

crotch strap, as shown above.

Rear-facing Aircraft Installation

Summary of Contents for Symphony All-in-One









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands